Green Construction

Qmark QPH4A Portable Electric Heater

skip125 — Tue, 18 Mar 2008 18:31:29 +0000

Qmark QPH4A portable electric garage shop space heaters, Comes with a 20 Amp plug and puts out 4,000 watts (13,652 BTU’s). It’s the perfect for a garage, home work shop, or small green house.

SPECIFICATIONS:
Product #: Qmark QPH4A
Finish: Black
Width: 16″
Height: 14″
Depth: 8″
Wattage: 4,000 (13,652 BTUs)
Weight: 24 lbs
Volts: 240
Amps: 16.67
Warranty: Limited 5 Year warranty on Element or Motor

DESCRIPTION:
240 Volts
High – 4,000 Watts (13,652 BTU/HR)
Low – 2,667 Watts ( 9,102 BTU/HR)208 Volts
High – 3,000 Watts (10,239 BTU/HR)
Low – 2,000 Watts ( 6,528 BTU/HR)

Dimensions-
16″ W x 14″ H x 8″ D

Weight – 25 Lbs.

APPLICATIONS:
Perfect for construction job sites, garages, workshops, any unheated area.

Two heat settings:
High setting 13,652 BTUs (4,000 Watts).
Low setting 9,102 BTUs (2,667 Watts)

- Easy to carry with built-in handles.
- Permanently lubricated, unit-bearing fan motor.
- Three-way bracket lets you stand unit on floor or other flat surface, or mount to ceiling or to wall.
- Adjustable thermostat to maintain heating comfort levels.
- Operates on 240 Volts. Comes equipped with 6-foot cord.
- Plug Type 20 Amp 240v NEMA #6-20P
- Fan-only switch

Mounting Bracket:
- Special Combination stand & swivel bracket enables unit to be positioned in a variety of ways.
- Especially easy to install on ceilings or walls, the bracket is already predrilled with 16” O.C. mounting holes.

- UL Listed

Warranty:
- Limited 5 Year warranty on Element or Motor

Qmark QPH4A portable electric garage shop space heaters.

Please visit us at iap-home.com for all our selections!

Residential Electric Baseboard Heaters

skip125 — Tue, 29 Jan 2008 23:32:41 +0000

Qmark 2500 Series Electric Baseboard Heaters

For use in residential construction such as single family homes, apartments, modular or mobile homes, as well as commercial, industrial and institutional construction as primary, secondary or supplemental heat for new construction or remodel applications. Easily installed without disassembly using mounting holes in rear of cabinet. Dual and triple ratings allow many models to cover most variations of wattage and voltage.

Designed for quiet operation… no popping and pinging normally associated with baseboard heaters. Lead wires and grounding pigtail allow quick field connection to either end of heater. Continuous capillary tube safety thermal cutout protection in case of airflow blockage. Five knockouts at each end for convenient wiring. Built-in cable clamp in each junction box for field wiring without additional hardware. Many different accessories available. • Chimney fin element design for maximum air circulation. Airflow is directed away from wall to help prevent wall soiling. UL listed for installation on wall at floor level with wall-to-wall carpeting. Heater stands unsupported during installation. Navajo White enamel finish retains attractive appearance and is compatible with all interior decors.

• Exclusive heating element design combines the durability of a steel tubular heater with the excellent heat transfer characteristics of aluminum fins

Residential Electric Wall Heaters

skip125 — Fri, 25 Jan 2008 22:40:28 +0000

Residential Electric Wall Heaters

Sometimes less is more

An offspring of the SILVC2060, we introduce to you the newest generation of our every so popular 2-in-1 bathroom heaters, the SILVC1560. Once again, we

have succeeded in combining two heating methods into one unit, offering both natural convection and forced-air heating, only this time to accommodate

medium to smaller sized bathrooms.

The built-in electronic thermostat activates a natural convection heating mode, generating 750W of noise-free heat – zero decibels! This energy-efficient

thermostat assures total comfort by maintaining a desired room temperature setting and eliminating annoying temperature fluctuations.

The built-in timer activates a forced-air heating mode, doubling the regular heating capacity to 1500W when you need it the most. Set the timer and this boost of heat will immediately be propelled into motion by the operation of a very quiet turbine, for up to 60 minutes.

Just like all of our other European-designed heaters, this one is just as smart-looking, surface-mounted or recessed. Again, with the three different colour

options of white, almond, and stainless steel finish, you simply cannot go wrong.

For more Residential Electric Wall Heaters check out

SILVC1560SS on iap-home.com

Qmark MUH0321 Electric unit heaters

skip125 — Fri, 09 Nov 2007 15:02:50 +0000

Qmark MUH0321 Electric unit heaters mount either horizontally or vertically. Totally versatile. For work shops, garages, basements. Can be used for primary, supplementary, spot, or dual-system heating.

Dimension:
Width: 14″
Height 16″

Depth: 7 1/2″

Model Qmark MUH03-21 :
- 240 Volts 1 phase,
- 12.5 Amps
- 3,000 watts (10,240 BTH/HR)

- 350 CFM
- 27 Lbs.

- 1/100 Motor HP

Optional Voltage

- 208 Volts 1 phase,
- 7.5 Amps
- 2,200 watts (7,512 BTH/HR)

Qmark MUH0321 Electric Unit heaters
Fearures:
• Heavy gauge die-formed steel housing. Two-toned, smartly styled.
• Advanced pull-through air flow design draws air across heating element for more even air distribution and cooler element operation.
• Specially designed venturi outlet to meet that added throw as required in vertical position.
• Branch circuit fusing (when required).
• Completely enclosed fan motor.
• Aluminum-finned, copper clad steel sheath heating element has longer useful life, because of cooler sheath temperature and faster heat dissipation.
• 24V control transformer standard on most models, providing a safer and more accurate means of temperature control. 3KW and 5KW, 208-277V, have line voltage controls as standard (24V control available on made-to-order basis).
• Automatic reset linear thermal cut-out, capillary type, provides protection over entire length of element areas (Manual reset protection available on made-to-order basis).
• Fan delay feature eliminates cold drafts. Element heats up before fan cuts in, then fan continues to distribute heat after element shuts off.
• Ruggedly built, yet lighter weight for easier installation. No piping flues, valves, or traps.
• Individually adjustable discharge louvers to control air flow. • Meets all UL, NEC, and OSHA requirements.Optional Accessories:
Thermostats:

Built-In Thermostat - MT-1 - Single Pole Internal Thermostat Temp. Range: 40°F – 85°F (View more images)
Wall Thermostat - WR651 - (Beige Finish) Single Pole Wall Mount Thermostat Temp. Range: 40°F – 85°F

Mounting Bracket:

Universal Wall & Ceiling Bracket - MMB10 (View more images)

Qmark MUH03-21 Electric Unit heaters

Bathroom Exhaust Fan with a Bulb Heater.

skip125 — Fri, 09 Nov 2007 14:51:09 +0000

Product #: Aupu A515A-W
Aupu A515A-W bathroom exhaust fans come with an Infrared bulb heater & a room light. This quiet bathroom exhaust fan has dual heat settings (2 lamps / 4 lamps) for energy savings. Aupu is a HVI Certified bathroom fan.
Included in the kit: (See View More Images for pictures)
3- Button control switch (fits in a double gang box)
2- AP270 infrared bulb heat lamps

5- Foot long flexible plastic duct tube.
60 Watt light bulb

FEATURES:

• Instantly heats the bath area by 2 AP270* infrared bulb heat lamps
• Heat protector to assure safety
• New-style metal housing for heat and aging resistance

*AP270 Lamp – all AP270 lamps are tested by rigorous 4° C ice-water splash to assure safety. AP270 lamps are long life 270W infrared heat lamps made from 100% anti-blast hard glass.

• Efficiently removes steam and fumes during quiet operations
• Long-life ball bearing motor with a very low noise level
• Thermal fuse protection

Note:
Do not locate directly in shower area.

Qmark CWH1151DS-AG Electric Wall Heater

skip125 — Thu, 06 Sep 2007 18:31:42 +0000

Qmark CWH1151DS-AG Electric Wall Heater

Qmark CWH1151-DS AG:

APPLICATIONS Fast heat response, compact design and versatility make the CWH Architectural Series heaters ideal for dens, basements, converted attics and breezeways, garages, bathrooms, small offices, workshops and similar areas. Also, adaptable to multiple installations in somewhat larger or odd shaped rooms.

FEATURES Heating element is heavy duty steel fins brazed to steel sheathed tubular elements in a grid pattern that covers the entire discharge area. FAN DELAY: On a call for heat, element is energized but fan is delayed until element is warm, eliminating the circulation of cold air during start up. When the thermostat is satisfied, the element is de-energized, but the fan continues until all heated air is discharged providing longer component life and higher comfort level. Designed for easy installation. Heater is mounted prior to wiring. Both hands are free to make field connections in roomy compartment. Motor is totally enclosed, impedance protected with permanently lubricated bearings. Airflow system maximizes air volume at minimum noise level; 65 CFM. Rugged louvered commercial grade steel Architectural grille creates downflow air pattern. This heater is designed for installation in 2 x 4 or larger wall sections using the wall box provided. The heater may also be surface mounted to the wall by using the Surface Mounting Frame, Model No. CWHSMAG (order separately). The heater may be wired with standard building wire (60°C). Refer to specification chart for correct supply voltage and wire size. Built-in snap action thermostat (no radio/TV interference; 40° – 85°F). A hole plug is provided for tamper resistant installations. Includes Built-In Disconnect Switch. Statuary Bronze durable polyester powder coat finish and aluminum frame.

RADIANT HEATERS FRR – Plug-In Radiant Heaters

skip125 — Wed, 25 Jul 2007 21:51:18 +0000

Qmar k FRR10512B, FRR11012B

FRR – Plug-In Radiant Heaters

Designed for supplemental indoor heating in residential and commercial areas; laundry rooms, work shops, toll booths, garages, assembly areas, loading and shipping docks and well houses. For residential and light commercial applications with gold anodized aluminum enclosure and reflector.

All Plug-In Radiant Heaters have Quartz Tube elements and 3 prong cord set.

Apply heat only where needed. Convenient ceiling chain mounting and cord set allow custom heating of only the areas being used. No need to waste energy heating the entire room or building.

Great heaters and more.

Qmark FBE – Portable Electric Convector Heaters

skip125 — Thu, 12 Jul 2007 13:57:17 +0000

Don’t waste energy and heat rooms you aren’t using. Maintain individual room control with portable electric convector heat – get heat only in the places you want.

100% energy efficient. Heat is dissipated by large fins into a strong convection flow. This delivers every bit of available heat.

Distinctively designed. High-impact Lexan® end panels with built-in handles. Low profile design enhances the unique appearance and add to the units overall stability.

Fills entire room with even comfort. No cold spots. No hot spots. The complete heating cycle fills your entire room with uniform, gentle floor-to-ceiling warmth and comfort.

Safety thermal cutout protection. Linear high temperature cutout safety checks the entire length of heater and will automatically shut off heater and will automatically shut off heater in the event of accidental air blockage.

2-year limited warranty.

Basic Stuff, 189 Lbs., Sticks 25, Woods, Pens,

Job 90, make it, Walking, KO, Skate and Jump, Bottles, Speak, Blue Stuff, looking, Not Done, Pop Corn, Rock it,

Rickys Heaters, Heating,

Qmark MEDH – Portable Electric Blower Heaters

skip125 — Thu, 12 Jul 2007 13:57:00 +0000

Qmark MEDH – Portable Electric Blower Heaters

Heavy duty fintube metal sheath heating element.

UL and CSA approved.

7.5, 10.0, 15.0, 20.0 & 30.0 KW heat outputs available.

Voltages include 208, 240, 480 & 600.

Fan only operation for summer cooling.

Single and three phase operation.

Shipped fully assembled.

Safe to operate in unattended areas.

Home Remodeling Products, Electric Heaters Blog,

DPH & CPH – Decorative and Commercial Pedestal Heaters

skip125 — Thu, 12 Jul 2007 13:56:41 +0000

DPH & CPH – Decorative and Commercial Pedestal Heaters

CPH/DPH Series units are ideal for high traffic areas with high heat needs where wall mounted units are not appropriate such as air, rail or bus terminals, corridors, lobbies, foyers, auditoriums, etc. These are not intended for residential applications. They can be mounted singly, in lengths from 28 inches to 10 feet, or joined end-to-end for complete perimeter heating. They are ruggedly built to withstand years of hard usage in public and commercial buildings.

A. Hazardous Atmosphere – Because the possibility of a concealed spark can exist from the built-in over-head cutout, heaters should not be used in potentially explosive atmospheres.

B. Corrosive Atmosphere – The high quality finish and steel internal sheet metal parts will give excellent service under most operating conditions, including coastal salt air and industrial atmospheres. However, the finish is not intended for direct salt spray exposure in marine application or highly corrosive greenhouse, swimming pool, chemical storage or industrial atmospheres.

C. Cleanliness – Although specifically designed for mounting below window areas, heaters can be installed on plaster, wood paneled, metal, masonry or composition wall surfaces with reasonable expectation of clean wall operation. Should some soiling occur, after a period of years, smooth walls may be cleaned with standard maintenance materials. For deep textured walls, consideration should be given to choice of enclosure height and watt per foot capacity – generally, the enclosure with lowest surface temperature will have the least soiling tendency.

D. Comfort – Optimum room comfort results when heater is mounted just below the window sill, since window cold down draft is eliminated and maximum convection air distribution without stratification is maintained throughout the room. Because of thetendency for warm air to stratify, installing heaters close to the ceiling is not recommended. If it should be necessary, at least 18” clearance above the air discharge must be maintained. Bottom of heaters are not intended for attractive appearance when mounted above eye level.

E. Air Throw – Since heaters provide only natural convection air throw, they are not ecommended for combatting cold outside air blasts through high traffic, main entry ways and vestibules. Heaters will maintain satisfactory comfort conditions in low traffic, side entry ways and vestibules, but for most entry ways, faster response fan driven heaters would be preferred.

F. Curtains, drapes or blinds – should clear the top of the heater by at least six inches. See I for vinyl blinds. Never permit draperies to completely cover the unit. Furniture – should be placed so it does not touch the heater and so it does not completely block the air vents. Allow at least 4” free space between furniture and the heaters.

G. Recess mounting – UL labeled for free standing wall surface mounting only. Not recommended for mounting behind built-in book shelves, storage cabinets, window seats, etc.

H. In institutional applications such as hospitals, nursing homes, child day-care centers and clinics, it is recommended that low-watt density convectors be used to provide optimum comfort at lowest case temperatures.

I. Due to variations in vinyl compositions and their potential to discolor, the use of stand-off brackets (SO1 or SO2) and/or specifying the lower watt density unit may be required when installing on vinyl wall-coverings or under vinyl window dressings. Prior to setting specifications, consult factory for installation recommendations.

Stelpro SK1501WA Electric Bathroom Wall Heaters

skip125 — Thu, 12 Jul 2007 13:56:24 +0000

Stelpro SK1501A Electric Bathroom Ceiling Heaters

A curtain of warm air to block out the cold!No other heating unit has been as successful in solving installation problems as the Ceiling Fan Heater. Are you lacking space by your patio door? Is your entrance too small for a baseboard? Is your bay window fogging up? The Ceiling Fan Heater is your answer. It recesses discreetly into the ceiling and throws down a curtain of warm air to block the entry of exterior cold air in order to maintain a comfortable temperature. Thanks to its carefully rounded corners, the grill blends in harmoniously with the ceiling.

Stelpro SILVC1560W Electric Bathroom Wall Heater

skip125 — Thu, 12 Jul 2007 13:56:04 +0000

Stelpro SILVC1560W Electric bathroom wall heater.This electric bathroom wall heater is will heat up to 150 Sq. Ft. bathroom. This bathroom heater has a builder timer for 2nd stage of electric heating.
Standard heat 750 watts ( 2,560 BTU’s) Convection heat
High heat 1,500 watts ( 5,120 BTU’s) Forced Air
Natural convection heating generating 750W, activated by thermostat (0 decibels).
Rapid heat output driven by a turbine engine that generates 1,500W (activated by timer).240 volts / 1 phase

Dimension:
Front Grille Dimension:
13 3/8″W x 1 3/4″D x 18 3/4″ H
Wall Hole Dimension:
11 1/4″W x 2 1/2″D x 18″ H

Weight: 20 lbs.
Made in CanadaExtreme power, ultimate comfort! After many years of extensive research, we are proud to announce the introduction of a silent bathroom heaters. Designed with your comfort in mind!

FEATURES:
- 20 gauge steel cabinet.
- 2 heating methods:
- Natural convection heating activated by the integrated electronic thermostat generating 750W and 0 decibels.
- Quick rise of temperature provided by 1,500 watts of power generated by a turbine motor (controlled by the timer).
- Precise electronic thermostat to ensure both comfort and energy efficiency.
- Integrated timer to provide a quick rise of temperature.
- Top quality nickel-chrome element to provide instant heat in an economical way.
- Quick and easy to install.
- Surface or recessed installation.
- Available in shiny white or smooth almond.
- Coated with an ultra-resistant and easy-to-clean polyurethane powder paint.
- Same European-style design as Silhouette convectors.
Features

Color:
- White Finish Construction

Element:
- Top quality nickel-chrome element for instant heat.

Thermostat:
- Precise electronic thermostat to ensure both comfort and energy efficiency.
- Integrated timer to increase heat rapidly.

Installation
- Fast, easy installation.
- Surface or recessed installation.
- For recessed mounting:
- Prepare a hole 11 1/4″ wide by 18″ high, minimum 4″ from the floor.

Warranty
- 10 years on element 1 year on componentsStelpro SILVC1560W Electric bathroom wall heater.

This electric bathroom wall heater is will heat a 75 sq. ft room. This bathroom wall heater has a built in timer for a 2nd stage of heating.

Radiant Electric Heaters RCC Cove Heaters

skip125 — Thu, 12 Jul 2007 13:45:13 +0000

Qmark RCC Cove Heater,

DUAL FUNCTION HEATING: In addition to radiant heat, the RCC Series uses part of its energy to heat air passing behind and over the heater by convection flow, thus helping to “mix” the air in the room and achieving balanced heating throughout.

INDIVIDUAL ROOM CONTROL – The finite control available with electric heat permits individual room or zone control for greater economy, why heat the entire house when you are using only one or two rooms? This applies equally well for whole house heating or supplemental heating.

NEW EXTRUSION DESIGN: The extruded aluminum front panel is coated with high temperature textured paint radiating a majority of its heat energy from the front surface. The remaining energy is “wiped off” by a convection flow behind and over the top of the heater which circulates warm air into the room.

CONVENIENT WALL MOUNTING – NEAR CEILING – The RCC cover heater mounts on any wall surface, near the ceiling where its dual function heating can be fully utilized. Radiant heat energy is directed downward, warming people and objects near the floor, as well as the floor itself. Room air gains heat from these objects and rises toward the ceiling. The back side of the cove heater acts as a convector heater, pulling the cooler air from the floor area, behind and over the heater, thus helping to circulate and mix the air in the room until it reaches an equilibrium temperature. The out-of-the-way mounting also permits complete freedom of furniture placement in a room, because the heaters will not be subjected to blockage, which reduces the efficiency of floor or low-wall mounted heaters.

Freezers, Compact Freezers, Laboratory Freezers,